1550 mm Embossed Floor Graphic Cold Lamination Film with Liner

■ What Is Embossed Floor Graphic Lamination Film?

Embossed floor graphic lamination film is a textured protective overlaminate applied over printed floor graphics using pressure rather than heat. Compared with standard glossy, matte or semi-matte cold lamination films, this product uses a thicker 180 µm PVC construction intended for floor-level graphic applications.

The embossed surface provides texture while the protective layer helps reduce damage to the printed graphic caused by abrasion, scratches, dirt, moisture and regular surface contact.

This 1550 mm wide-format version is supplied in a 40 m roll with pressure-sensitive acrylic adhesive and a double PE-coated release liner. It is suitable for larger commercial floor graphics, exhibition applications and wide-format print finishing workflows.

■ Key Benefits

• Embossed Surface: Provides a textured finish designed for floor graphic applications.
• 180 µm PVC Construction: Provides a thicker protective layer than standard decorative cold lamination films.
• Abrasion Protection: Helps protect printed graphics from wear caused by regular surface contact.
• Scratch & Dirt Protection: Adds a protective layer over compatible printed media.
• Moisture Protection: Helps protect the graphic surface from incidental moisture exposure.
• Heat-Free Application: Pressure-sensitive acrylic adhesive allows cold lamination without thermal equipment.
• Controlled Handling: Double PE-coated release liner protects the adhesive before application.
• 1550 mm Wide-Format Width: Suitable for larger commercial floor graphics and wide-format production workflows.
• Made in Taiwan: Manufactured for commercial printing and international B2B material supply.

■ Recommended Applications

■ Technical Specifications

■ About Slip Resistance

The embossed surface provides texture and is designed for floor graphic applications. However, the suitability of a finished floor graphic for pedestrian use depends on the complete installed system, including the overlaminate, printed media, adhesive, installation surface and environmental conditions.

For projects requiring a formal slip-resistance classification, coefficient of friction value or compliance with a specific local safety standard, buyers should confirm the required test method and applicable technical documentation before ordering.

■ Printing & Ink Compatibility

The published product information lists Solvent, Eco-Solvent and UV as compatible printing workflows. Because this product is used as an overlaminate, compatibility should be evaluated with the complete printed graphic rather than the lamination film alone.

Before lamination, allow printed media to cure or outgas according to the printer, ink and media supplier recommendations. Test adhesion and surface appearance using the actual printed substrate before full-volume production.

■ When to Choose the 1550 mm Width

The 1550 mm width is intended for larger floor graphics and production environments requiring a wider laminating format.

• Confirm that the cold laminator supports at least 1550 mm working width.
• Measure the printed floor graphic and include the required trimming allowance.
• Choose this width for graphics larger than the 1295 mm product range.
• Consider the 25 kg roll weight when planning material handling and equipment loading.
• Confirm storage and transportation space for the 160 cm package length.

■ 1295 mm vs 1550 mm Floor Graphic Lamination Film

Both widths use the same published 180 µm embossed PVC construction and are intended for floor graphic protection. The primary selection difference is the required production width.

• 1295 mm: Suitable for common wide-format floor graphic workflows and smaller finished graphics.
• 1550 mm: Suitable for wider printed graphics where additional production width can reduce trimming or paneling requirements.

Always confirm laminator capacity, printed media width, finished graphic dimensions and roll handling requirements before selecting a size.

■ Floor Graphic Film vs Standard Lamination Film

This Embossed Floor Graphic Cold Lamination Film uses a 180 µm textured PVC construction and is intended for printed floor graphic applications.

For posters, photos, signage and general printed graphics that do not require a thicker embossed surface, explore Glossy, Matte & Semi-Matte Cold Lamination Films .

■ Cold Lamination Instructions

1. Allow the printed media to dry, cure or outgas according to the applicable printer, ink and media recommendations.
2. Ensure the printed surface is clean, dry and free from dust, oil and moisture.
3. Confirm that the 1550 mm film width covers the complete printed floor graphic and required trimming allowance.
4. Load and align the 25 kg wide-format roll carefully in suitable cold lamination equipment.
5. Remove the release liner gradually while applying consistent pressure across the full width.
6. Maintain alignment and tension to reduce wrinkles, trapped air and edge lifting.
7. Evaluate the complete floor graphic system on the intended installation surface before full production or installation.

■ Related Floor Graphic & Specialty Films

• View All Embossed Floor Graphic Cold Lamination Films
• View 1295 mm Embossed Floor Graphic Lamination Film
• Explore Anti-UV & Floor Graphic Lamination Films
• Explore Glossy, Matte & Semi-Matte Lamination Films
• View All Cold Lamination & Overlaminate Films
• What Is Cold Lamination Film? Types, Applications & Benefits

■ OEM & Private-Label Supply

Jiu Mao provides OEM and private-label manufacturing support for distributors, wholesalers, importers and printing material suppliers. Custom roll specifications, packaging and labeling requirements can be discussed according to technical feasibility and purchasing volume.