Floor Graphic Lamination Film Manufacturer

Embossed Floor Graphic Cold Lamination Film with Liner

Embossed Floor Graphic Cold Lamination Film with Liner is a 180 µm pressure-sensitive PVC overlaminate designed to add a textured protective surface to printed floor graphics without heat.

Embossed Textured Surface: Provides a textured finish designed to improve surface traction while protecting promotional, directional and commercial floor graphics.
Thicker Protective Construction: The 180 µm PVC film provides a firmer protective layer than standard 80 µm finish-based cold lamination films.
Graphic Surface Protection: Helps protect printed floor graphics from abrasion, scratches, moisture and damage caused by regular foot traffic.
Pressure-Sensitive Structure: Uses acrylic adhesive and a double PE-coated release liner for heat-free cold lamination application.
Available Roll Sizes: Offered in 1295 and 1550 mm widths, with a standard roll length of 40 m.
Recommended Applications: Suitable for retail promotions, exhibition floor graphics, directional graphics, event signage and other commercial floor advertising applications.
Slip-Resistance Requirements: Projects requiring a formal anti-slip rating should confirm the applicable test method, installation surface and local safety standard before ordering.
Printed Media Compatibility: Suitable for protecting compatible graphics printed with solvent, eco-solvent or UV-curable inks after proper curing and adhesion testing.
OEM Supply: Custom roll requirements, specifications, packaging and private-label programs can be discussed according to technical feasibility.

1295 mm Embossed Floor Graphic Cold Lamination Film with Liner

180 μm embossed PVC cold lamination film designed to protect printed floor graphics with a thicker textured surface. Supplied in a 1295 mm × 40 m roll with acrylic adhesive and a double PE-coated release liner.

1550 mm Embossed Floor Graphic Cold Lamination Film with Liner

180 μm embossed PVC cold lamination film designed to protect wide-format printed floor graphics with a thicker textured surface. Supplied in a 1550 mm × 40 m roll with acrylic adhesive and a double PE-coated release liner.

180 µm Embossed Overlaminate for Printed Floor Graphics

Embossed Floor Graphic Cold Lamination Film with Liner is a pressure-sensitive PVC overlaminate designed to protect printed floor graphics while adding a textured surface. It is applied over compatible printed media without heat using a cold laminator or suitable application equipment.

Jiu Mao Industrial Co., Ltd. has manufactured cold lamination film and large-format printing materials in Taiwan since 1998. The current floor graphic overlaminate series is available in 1295 and 1550 mm widths for distributors, wholesalers, importers and printing material suppliers requiring standard, OEM or private-label products.

What Is Floor Graphic Lamination Film?

Floor graphic lamination film is a transparent or translucent protective overlaminate applied over a printed floor graphic. It helps protect the printed surface from abrasion, scratches, moisture and damage caused by handling or foot traffic.

Unlike standard glossy or matte cold lamination films used primarily for visual finishing, this product uses a thicker 180 µm PVC construction and an embossed textured surface for floor graphic applications.

The final performance of a floor graphic depends on the complete system, including the printable base media, ink, curing, overlaminate, adhesive compatibility, floor surface, installation method and environmental conditions.

Key Benefits of Embossed Floor Graphic Overlaminate

Textured surface: The embossed finish is designed to provide additional surface texture for floor graphic applications.
Thicker protective layer: The 180 µm PVC construction provides a firmer material body than Jiu Mao's standard 80 µm finish-based lamination films.
Abrasion protection: Helps protect the printed image from scratches, moisture and surface wear.
Heat-free application: Uses pressure-sensitive acrylic adhesive and can be applied without thermal lamination equipment.
Wide-format production: Available in 1295 and 1550 mm widths for different commercial floor graphic dimensions.
Commercial graphic applications: Suitable for promotional, directional, event and exhibition floor graphics.

Available Floor Graphic Lamination Film Sizes

Both current products use the same 180 µm embossed PVC film, acrylic adhesive, double PE-coated release liner and 40 m roll length. The main differences are roll width, product weight and packaging size.

Product	Roll Size	PVC Thickness	Surface	Release Liner	Weight	Packaging
1295 mm Embossed Floor Graphic Film	1295 mm × 40 m	180 µm	Embossed / Textured	Double PE-coated	21 kg	140 × 17 × 17 cm
1550 mm Embossed Floor Graphic Film	1550 mm × 40 m	180 µm	Embossed / Textured	Double PE-coated	25 kg	160 × 17 × 17 cm

Both listed products have a published shelf life of 12 months under recommended storage conditions and are manufactured in Taiwan.

Recommended Floor Graphic Applications

Suitable Applications

Retail and supermarket floor promotions
Exhibition and event floor graphics
Directional and temporary wayfinding graphics
Commercial floor advertising
Indoor promotional floor signage
Short-term campaign and branded floor graphics

Confirm Before Use

Required slip-resistance test method
Printed base media compatibility
Floor material and surface condition
Expected installation period
Indoor or outdoor environment
Cleaning, moisture and traffic conditions

Slip-Resistance & Floor Safety Requirements

The embossed surface is designed to provide texture for floor graphic applications. However, a textured surface alone should not be treated as proof that the complete floor graphic system meets every anti-slip or floor-safety requirement.

For projects requiring a formal slip-resistance classification, buyers should confirm:

The required local or international test standard
Whether testing is performed under dry, wet or contaminated conditions
The tested printable base film and adhesive system
The floor substrate and installation method
The required coefficient of friction or classification
Whether the report applies to the complete installed floor graphic system

The final safety and suitability of the installed graphic may depend on the printable media, overlaminate, floor material, installation quality, cleaning method, moisture and traffic conditions.

Compatible Printed Graphics

This product is an overlaminate applied over printed floor graphic media; it is not intended to be used as a directly printable substrate. The current product information lists compatibility with solvent, eco-solvent and UV ink systems.

A more precise purchasing specification is to state that the film is suitable for protecting compatible media printed with solvent, eco-solvent or UV-curable inks, subject to proper print curing, outgassing, adhesion and complete-system testing.

How to Choose the Correct Roll Width

Measure the printed floor graphic width and include the required trimming allowance.
Select a lamination roll wide enough to cover the complete printed graphic without leaving unprotected edges.
Use 1295 mm for common wide-format floor graphics and 1550 mm for larger commercial floor applications.
Confirm the maximum working width and roll-weight capacity of the cold laminator.
Review the individual product page for exact product weight and packaging dimensions.

Cold Lamination & Installation Notes

Allow the printed media to dry, cure or outgas according to the printer, ink and media supplier recommendations.
Test adhesion between the overlaminate and actual printed floor graphic media before full production.
Ensure the printed surface is clean, dry and free from dust before lamination.
Apply consistent pressure using a suitable cold laminator.
Confirm that the complete laminated floor graphic is compatible with the intended floor surface.
Install only on a clean, dry and structurally stable floor.
Test edge adhesion, removability and cleaning performance before large-scale installation.
Outdoor use should be confirmed separately according to weather exposure, moisture and project duration.

Floor Graphic Film vs Standard Cold Lamination Film

Standard glossy, matte and semi-matte cold lamination films are primarily selected to control the visual finish and provide general protection for signs, posters and display graphics.

Choose this embossed floor graphic overlaminate when the printed graphic will be installed on a floor and requires a thicker, textured protective surface. For standard non-floor graphics, explore Glossy, Matte & Semi-Matte Cold Lamination Films.

OEM & Private-Label Floor Graphic Lamination Film

Jiu Mao provides OEM and private-label manufacturing support for distributors, wholesalers, importers and printing material suppliers. Custom roll dimensions, product specifications, packaging and labeling can be discussed according to technical feasibility and purchasing volume.

Buyers requiring slip-resistance testing, REACH, RoHS, California Proposition 65 or other market-specific documentation should provide the selected product, destination market and required test standard during the quotation process.

Related Cold Lamination Film Products

Need Embossed Floor Graphic Lamination Film?

Tell us your printed floor media, required roll width, installation surface, traffic conditions, slip-resistance requirement, project duration, estimated quantity and destination market. Our team will help confirm the available standard or customized specification.

Request Floor Graphic Film Specifications