1370 mm semi-matte cold lamination film, semi-matte lamination film with liner, low glare lamination film, 80 micron lamination film, semi-matte overlaminate film, large format print protection film, OEM lamination film, Taiwan lamination film manufacturer

■ Product Overview

Semi-matte cold lamination film is a pressure-sensitive protective film applied over printed graphics without heat. Its surface provides a subtle sheen between glossy and matte finishes, helping reduce harsh reflections while maintaining visual depth and printed image clarity.

This 1370 mm width is supplied in a 45 m roll and uses pressure-sensitive acrylic adhesive with a PE-coated release liner. It is suitable for wide-format retail graphics, exhibition panels, presentation materials, photographic prints, posters and compatible printable vinyl requiring a refined semi-matte finish.

■ Key Benefits

• Balanced Surface Sheen: Provides more visual depth than a fully matte surface without the strong reflection of high-gloss film.
• Reduced Harsh Glare: Helps improve visibility in environments with overhead lighting, windows or spotlights.
• Refined Presentation: Creates a soft and professional appearance for commercial display graphics.
• Visual Clarity: Helps maintain printed image detail and balanced color presentation.
• General Surface Protection: Helps protect graphics from scratches, dirt, moisture and regular handling.
• Heat-Free Application: Pressure-sensitive acrylic adhesive eliminates the need for thermal lamination equipment.
• Controlled Handling: PE-coated release liner protects the adhesive before application.
• Wide-Format Production: The 1370 mm width supports signage, retail display and exhibition graphic workflows.
• Made in Taiwan: Manufactured for commercial printing applications and international printing material buyers.

■ Recommended Applications

Final suitability depends on the printed substrate, ink system, print curing, adhesive compatibility, installation method and environmental conditions. Testing on the actual printed media is recommended before full production.

For outdoor applications, the available product information does not specify a guaranteed outdoor service life. Actual performance depends on UV exposure, climate, mounting surface and the complete printed graphic system.

■ Technical Specifications

■ When to Choose the 1370 mm Width

• Confirm that the cold laminator supports a working width of at least 1370 mm.
• Measure the printed graphic and include the required trimming allowance.
• Select this width for graphics exceeding the 1295 mm product range.
• Confirm that production staff and equipment can safely handle the 15.9 kg roll.
• Check storage and transportation requirements for the 141 cm package length.

■ When to Choose Semi-Matte Lamination Film

Choose semi-matte cold lamination film when a printed graphic requires more surface depth than a fully matte finish but less glare and reflection than a high-gloss surface.

• Retail graphics requiring a subtle surface sheen
• Exhibition panels exposed to directional lighting
• Presentation materials requiring a refined finish
• Photographic prints requiring balanced visual depth
• Wide-format posters where neither full gloss nor full matte is preferred

For stronger color saturation and a highly reflective surface, consider Glossy Cold Lamination Film.

For greater glare reduction and a softer non-reflective appearance, consider Matte Cold Lamination Film.

■ Cold Lamination Instructions

1. Allow the printed media to dry, cure or outgas according to the printer, ink and media supplier recommendations.
2. Ensure the printed surface is clean, dry and free from dust, oil and moisture.
3. Confirm that the 1370 mm film width covers the printed graphic and required trimming allowance.
4. Load and align the roll carefully in the cold laminator.
5. Remove the release liner gradually while applying consistent pressure across the full width.
6. Maintain consistent alignment and tension to reduce wrinkles, trapped air and edge lifting.
7. Check the finished graphic under the actual display lighting to confirm the desired semi-matte appearance.
8. Test adhesion and visual appearance before full-volume production.

■ Standard Semi-Matte Film or Anti-UV Film?

This standard semi-matte cold lamination film is designed primarily for balanced sheen, visual finishing and general surface protection.

Projects requiring documented UV protection, a defined UV blocking rate or specific outdoor weathering performance should review the Anti-UV Glossy Cold Lamination Film series and confirm the applicable technical data.

■ Related Lamination Film Options

• View All Semi-Matte Cold Lamination Film Widths
• View 940 mm Semi-Matte Cold Lamination Film
• View 1295 mm Semi-Matte Cold Lamination Film
• View 1550 mm Semi-Matte Cold Lamination Film
• Explore Glossy Cold Lamination Film
• Explore Matte Cold Lamination Film
• Compare Glossy, Matte & Semi-Matte Films
• View All Cold Lamination & Overlaminate Films
• Matte vs Glossy Lamination Film
• What Is Cold Lamination Film?

■ OEM & Private-Label Supply

Jiu Mao provides OEM and private-label manufacturing support for distributors, wholesalers, importers and printing material suppliers. Custom roll widths, film specifications, packaging and labeling can be discussed according to technical feasibility and purchasing volume.