Semi-Matte Cold Lamination Film Manufacturer

Semi-Matte Cold Lamination Film with Liner

Semi-Matte Cold Lamination Film with Liner is an 80 µm pressure-sensitive PVC overlaminate designed to provide a balanced surface appearance between Glossy and Matte while adding a protective layer over compatible printed graphics without heat.

Balanced Semi-Matte Finish: Provides moderate sheen and reflection between Glossy and Matte finishes for applications where neither a highly reflective nor fully matte-looking surface is preferred.
Lower-Reflection Appearance: Provides less surface reflection than a high-gloss finish and can be considered for retail, exhibition and display environments with stronger ambient or overhead lighting.
General Graphic Protection: Adds a protective layer over compatible printed graphics to help reduce direct exposure to routine handling, dirt and surface contact.
Standard Construction: 80 µm Semi-Matte PVC film with pressure-sensitive acrylic adhesive and a PE-coated release liner.
Available Roll Sizes: Available in 940, 1295, 1370 and 1550 mm widths, with a standard roll length of 45 m.
Compatible Applications: Can be considered for compatible photo paper, printable vinyl, PVC display materials, posters, signage and large-format printed graphics. Compatibility should be evaluated with the actual printed substrate before volume production.
OEM / ODM & Private-Label Requirements: OEM / ODM and private-label requirements can be discussed according to product specifications, roll width, thickness, packaging, labeling, purchasing quantity and technical feasibility. Testing and documentation requirements should be confirmed according to the selected product and destination market.

940 mm Semi-Matte Cold Lamination Film with Liner

80 μm semi-matte PVC cold lamination film in a 940 mm × 45 m roll, featuring acrylic adhesive and a PE-coated release liner for balanced sheen, reduced glare and printed graphic protection.

1295 mm Semi-Matte Cold Lamination Film with Liner

80 μm semi-matte PVC cold lamination film in a 1295 mm × 45 m roll, featuring acrylic adhesive and a PE-coated release liner for balanced sheen, reduced glare and large-format print protection.

1370 mm Semi-Matte Cold Lamination Film with Liner

80 μm semi-matte PVC cold lamination film in a 1370 mm × 45 m roll, featuring acrylic adhesive and a PE-coated release liner for balanced sheen, reduced glare and large-format print protection.

1550 mm Semi-Matte Cold Lamination Film with Liner

Wide-format 80 μm semi-matte PVC cold lamination film in a 1550 mm × 45 m roll, featuring acrylic adhesive and a PE-coated release liner for balanced sheen, reduced glare and large-format print protection.

Semi-Matte Cold Lamination Film for Large-Format Printing & Signage

Semi-Matte Cold Lamination Film with Liner is a pressure-sensitive PVC overlaminate applied to printed graphics without heat. Its surface provides moderate sheen and reflection between Glossy and Matte finishes, offering a balanced visual appearance for printed graphics.

Established in 1998, Jiu Mao Industrial Co., Ltd. is a Taiwan-based manufacturer of cold lamination film, printable vinyl and large-format printing media. This semi-matte series is published in 940, 1295, 1370 and 1550 mm widths for distributors, wholesalers, importers and printing material suppliers.

Semi-Matte Cold Lamination Film at a Glance

Film Material	PVC overlaminate film
Surface Finish	Semi-Matte — balanced appearance between Glossy and Matte
Film Thickness	80 µm
Adhesive	Pressure-sensitive acrylic adhesive
Release Liner	PE-coated release liner
Roll Widths	940, 1295, 1370 and 1550 mm
Roll Length	45 m
Shelf Life	12 months under recommended storage conditions
Origin	Manufactured in Taiwan

Key Benefits of Semi-Matte Cold Lamination Film

Balanced surface appearance: Provides moderate sheen between Glossy and Matte finishes.
Lower-reflection appearance: Provides less reflection than a high-gloss finish and may be considered for graphics viewed under stronger ambient or overhead lighting.
General graphic protection: Adds a protective layer over compatible printed graphics to help reduce direct exposure to routine handling, dirt and surface contact. Actual protection depends on the complete graphic system and application environment.
Heat-free application: Uses pressure-sensitive acrylic adhesive and can be applied without thermal lamination equipment.
Multiple production widths: Available in 940, 1295, 1370 and 1550 mm widths for different large-format printing requirements.

Semi-Matte Lamination Film Sizes & Specifications

All four current models use the same 80 µm semi-matte PVC film, pressure-sensitive acrylic adhesive, PE-coated release liner and 45 m roll length. The primary differences are roll width, product weight and packaging size.

Product	Roll Size	PVC Thickness	Finish	Liner	Weight	Packaging
940 mm Semi-Matte Cold Lamination Film	940 mm × 45 m	80 µm	Semi-Matte	PE-coated release liner	11 kg	99 × 18 × 18 cm
1295 mm Semi-Matte Cold Lamination Film	1295 mm × 45 m	80 µm	Semi-Matte	PE-coated release liner	14 kg	135 × 18 × 18 cm
1370 mm Semi-Matte Cold Lamination Film	1370 mm × 45 m	80 µm	Semi-Matte	PE-coated release liner	15.9 kg	141 × 18 × 18 cm
1550 mm Semi-Matte Cold Lamination Film	1550 mm × 45 m	80 µm	Semi-Matte	PE-coated release liner	17 kg	159 × 18 × 18 cm

All listed models have a published shelf life of 12 months under recommended storage conditions and are manufactured in Taiwan.

When Should You Choose Semi-Matte Lamination Film?

Semi-matte cold lamination film is suitable when a balanced surface appearance between Glossy and Matte finishes is preferred.

Retail and point-of-purchase displays
Exhibition panels and trade show graphics
Presentation boards and display graphics
Promotional posters requiring moderate surface sheen
Photographic and printed display graphics
Large-format signage where a balanced finish is preferred

For outdoor applications, final performance depends on the printed media, ink, adhesive compatibility, installation quality, UV exposure and environmental conditions. Buyers requiring a defined outdoor service life should state the required test method and expected application environment when requesting a quotation.

Compatible Printed Substrates & Applications

Compatible Printed Substrates

Photo paper and photographic prints
Printable vinyl and self-adhesive graphics
PVC sheets and display materials
Posters and large-format printed media

Typical Applications

Retail and POP displays
Exhibition and trade show graphics
Presentation and display panels
Advertising and promotional graphics

Buyers should confirm compatibility with the printed media, ink system and finished-graphic requirements before volume production.

How to Choose the Correct Roll Width

Measure the finished graphic width and include the trimming allowance required by the production process.
Select a lamination roll wide enough to cover the complete print without leaving an unprotected edge.
Confirm the maximum working width of the cold laminator before ordering.
Use the 940 mm option for narrower graphics, 1295 or 1370 mm for common wide-format production, and 1550 mm for larger signage and display graphics.
Confirm core compatibility, roll weight, handling capacity and storage requirements.

Semi-Matte vs Glossy vs Matte Lamination Film

Choose Semi-Matte when a balanced surface appearance between Glossy and Matte is preferred. Choose Glossy Cold Lamination Film when a brighter, more reflective appearance is preferred.

Choose Matte Cold Lamination Film when a softer, lower-reflection appearance is preferred.

For a detailed finish comparison, read Matte vs Glossy Lamination Film: Which One Should You Choose?

This standard Semi-Matte series is intended primarily for surface-finish selection and general graphic protection. Projects where UV-related fading is a specific concern should review the Anti-UV Glossy Cold Lamination Film series and confirm the applicable product specification and available technical documentation.

Cold Lamination Application Notes

For solvent or eco-solvent printing, follow the printer, ink and media supplier's recommendations for drying or outgassing before lamination. For UV-curable printing, follow the applicable curing and lamination recommendations for the selected ink and media system.
Ensure the printed surface is clean, dry and free from dust, oil and moisture.
Remove the release liner gradually and apply the film using a cold laminator or suitable hand roller.
Maintain consistent pressure and alignment to reduce wrinkles, trapped air and edge lifting.
Test adhesion and visual appearance on the actual printed substrate before full-volume production.

Why Source Semi-Matte Cold Lamination Film from Jiu Mao?

Established in 1998 — a Taiwan-based manufacturer of cold lamination film, printable vinyl and large-format printing media
Semi-matte series published in four roll widths with 80 µm film, acrylic adhesive and PE-coated release liner
Works with distributors, wholesalers, importers and printing material suppliers
OEM / ODM and private-label requirements can be discussed according to technical feasibility

→ About Jiu Mao Industrial

OEM / ODM & Private-Label Semi-Matte Lamination Film

Jiu Mao works with international distributors, wholesalers, importers and printing material suppliers. OEM / ODM and private-label requirements can be discussed according to product specifications, roll width, thickness, packaging, labeling, purchasing quantity and technical feasibility.

Looking for a manufacturing partner? Read our Cold Lamination Film Manufacturer B2B Sourcing Guide to review product range, specifications, OEM / ODM feasibility, testing documentation and purchasing requirements.

Testing & Documentation Support

Depending on the selected product, customer requirement and destination market, Jiu Mao can provide or assist with arranging third-party testing and documentation support related to Phthalates, RoHS and REACH / SVHC.

Testing and compliance documentation should be confirmed according to the specific product, applicable material batch, actual test report and destination-market requirement. Buyers with other market-specific requirements should state the selected product, destination market and required standard when submitting an inquiry.

Related Semi-Matte Lamination Film Resources

Looking for Semi-Matte Cold Lamination Film?

Tell us your printed substrate, lighting environment, desired surface appearance, required roll width, finished graphic size, estimated quantity, packaging requirements and destination market. Our team can help confirm a suitable standard product or discuss OEM / ODM and private-label requirements according to technical feasibility.

Request a Film Recommendation Compare Glossy, Matte & Semi-Matte Films